A revolving generator

The demand in FSI FIIO: 2011111642/017192 from 29.03.2011 The revolving elektrogenerator

The purpose of the given invention is to improve the revolving electric generators that exist nowadays.

The drawback of today's electrogenerators, which, while rotating, create a magnetic field and electric energy is produced, is in the major effort that should be applied to make the generator revolve. The magnetic field creates resistance which is greater when the generator is more powerful, as a result the effort necessary to apply for rotating is greater when the generator is more powerful.

The technical task of this invention is to exclude mentioned disadvantages by using the power of gravity and locating perpendicularly to the horizontally inclined rotating shaft of forward units generating the current when the "anchor" moves up-down.

. The task can be attained by the fact that rotating of forward generator units will be putting them in up-down positions in turns, along with that while the "anchor" moves up and down, it will induce with the stator producing the current. The "anchor" can be made of any material.
Both wind-powered and water-powered movers (and others) can make the drum of the generator revolve.

It will not be of any difficulty to install current-measuring sensors on each forward generating unit. But the changes in readings of sensors will point out the failure of its functioning. The potential cause of such failure can be the rupture or malfunction of the electric chain, as well as the increased rubbing due to the burrs that direct the "anchor".
So, to eliminate the defects and increase the amount of the produced current it is necessary to replace the failed generator unit.
If the whole revolving drum, which has forward generator units on it, does not stop, then the generator plant will not fail as well. Only the produced current can drop. And how far it will drop depends on the number of failed forward generator units.
The major resisting power is rubbing that definitely occurs when there is differentiation of the rotating shaft.

The revolving generator of the electric current consisting of several forward generator units located perpendicularly to the axis, and which is moved by the power of gravity, works the following way.

When the shaft of the generator plant is revolving, the forward generator units constantly change their position in the space. When up, the "anchor" of the generator unit due to its own gravity goes down. When the generator plant turns 180 degrees, the "anchor" of the generator unit moves up due to the same gravity. During every movement up or down of the "anchor" of the generator unit due to the induction of the magnetic fields of the "anchor" with the "stator" the generator unit produces electric current.

To stabilize electric current it might be necessary to get an accumulating electric current - the element.

For the stationary power plants the type and the size of the accumulator are not important, the most significant here are the price and reliability. For mobile generators the weight and the size will be of great importance.

Formula of the invention

The revolving generator of the electric current consisting of several forward generator units located perpendicularly to the axis, and which is moved by the power of gravity.


It is impossible to define without proper calculations how far the generator's efficiency factor will reach. if we take into consideration the partial compensation by a gravity force, then the rotation is supposed to become facilitated.
The given principal is applied in the electric flashlights which only need to be shaken in order to charge the built-in accumulator. The wave force can be used as a propelling agent for forward generator-units.
It would be preferrable to make the revolving drums from the generator-units composable. In this case if the propeller that revolves the generator unit is powerful enough, then it will be possible to "thread" several drums on the shaft.
Unification of the forward generator units will give a personnel an opportunity to replace and repair the generator units faster and in a more reliable manner.

To improve the efficiency factor of work of the generator with the propeller which cannot provide constant strain, as, for instance, in wind propellers, the following procedures should be performed:

Variant 1: with the reduction of the strain, for example, reduction of wind's speed, it's necessary to reduce th transmitting number in gear's differential.

Variant 2: to install a clutch of diconnecting gears from the revolving drums with forward generator units.The number of the drums connected to the gear will depend on the effort of the propeller that passes on the generator rotating shaft. For instance, from the power of wind in case with the wind turbine.

Calculations and trials will show which variant is more acceptable in each separate unstable propeller. But we should consider the maximum speed of the drums rotation, so that the centrifugal force is not stronger than the gravity force of the "anchor" of the generator units. Forward generator units should be hermetic to last longer.

The drawback of this generator is that it's impossible to make the drum's diameter smaller because the amplitude of the motion of the "anchor" cannot be low, so does the length of the generator unit. This means that the 2 lengths of the forward generator units cannot be small and this is one and only diameter for the drums of the generator.

The given generator should be located in trucks between the cab and the body.
In Jeeps, buses and cars with "universal" body the only place to locate it is in the back. But the automobile will lose the ability of backloading.
Unfortunately, for other cars like sedan, coupe or hatchback the installaion of the generator (even flat one) doesn't seem possible to me.

| idea