Patent: 103167 from 15.10.2010 It is valid to 2020 The lampshade with a motion sensor

The utility model belongs to domestic electric appliances and serves for an automatic turn-on/turn-off the light and sound devices when they reach the area of active objects.
There are plenty of devices with similar functions but they have a drawback which lies in a long process of installation and a complex assembly and cannot be performed by people with no experience in this area.

The technical purpose of the potential utility model is to exclude existing disadvantages by putting a few sensors in one frame which serves as an adapter between an electrical socket and an electrical lamp or a sound siren. In the frame of the utility model there is a cap for twisting it into the electrical socket and the model itself is a socket for a lamp or a sound siren.
There is also the motion sensor, the timer of the delay of turning on the lamp or the sound siren, and the control of brightness of the lamp light or the volume of the sound siren.

The size and shape of the utility model will depend on the size of the composing details but the diameter will certainly be bigger than the diameter of the cap of the lamp with the length not less than a double length of the cap of the electrical lamp.
Outside the frame of the utility model there will be located the controls of sensitivity of the motion sensor, the controls of the delay of turning on and the control of brightness of the lamp light.

The mentioned set of features of the utility model will allow to increase the functioning time of the electrical lamps, to save the energy, as well as to use the model as an alarm system. The lampshade with a motion sensor works the following way.
The lampshade is to be twisted into the electric socket. The lamp is to be twisted into the utility model.
The regulation of the sensitivity of the motion sensor will be performed by turning the necessary control located on the frame of the utility model. The regulation of the time when the lamp or a sound siren is on will be performed by turning the timer control. The regulation of the brightness of the lamp light or the volume of the sound siren will be performed by turning the necessary control located on the frame of the utility model.

The flexiblity, as well as the increased time of functioning of electric lamps and energy savings can be achieved by the fact that the electric lamps will switch on and off in an off-line mode and only in case an active object reaches the area of activity of a motion sensor. The timer of delay will allow to regulate the time during which the electric lamp or a sound siren is on, it will also be possible to control the time-out to the taste and preferences of the consumer.The control of brightness of the lamp light will allow to set this mode independently from a type of a lamp available at the moment. For example, using the utility model as a night lamp.

The formula of the utility model:

The lampshade with a frame containing a motion sensor, controls of the time-out to turn on and brightness, as well as a cap for twisting it into an electric socket and a socket for twisting a lamp in it.

The summary:

Due to a non-cooling feature of many electric components of this utility model, it will be necessary to limit the capacity of the electric filament lamps or apply energy saving lamps because they get hot less. To limit the capacity of the electric filament lamps can be done by replacing them with the smaller ones or with the help of brightness control.

Go home

|